Documentation Index
Fetch the complete documentation index at: /llms.txt
Use this file to discover all available pages before exploring further.
Every figure, in one place.
| What | Value |
|---|---|
| Channels per project | 16 |
| Channels on screen at once | 4 per page |
| Channels in a new project | 2 |
| Minimum channels | 1, and at least 1 visible |
| Initial steps | 16 (changed in Settings) |
| Channel name length | 24 characters |
| Signal colors | 6 — blue, red, green, yellow, orange, magenta |
| What | Range |
|---|---|
| Division of a selection | 1 to 99 sub-steps |
| Offset of a selection | Up to the project length, in whole steps |
| Channel offset (display only) | −1 to 1 steps |
| What | Value |
|---|---|
| Format | .txt text file |
| Analog resolutions | 8, 10, 12 (default) or 16 bits |
| Levels per resolution | 0–255, 0–1023, 0–4095, 0–65535 |
| Default name | signal_export |
| What | Value |
|---|---|
| Digital channels | 8 |
| Analog channels | 2 |
| State changes (digital) | 2048 |
| Samples per channel (analog) | 6000 |
| Minimum step time | 5 µs |
| Output voltage | 0 to 3.3 V |
| Mode | Pins |
|---|---|
| Digital | GPIO 16, 17, 18, 19, 21, 22, 23, 13 |
| Analog | GPIO 25 (DAC1), GPIO 26 (DAC2) |
| Voltage reference in digital | GPIO 25 |
| Protocol | Channels used | What you set |
|---|---|---|
| UART | 1 | Data bits (5–9), parity, stop bits (1–2), first bit, idle |
| CAN | 1 | Dominant level |
| I2C | 2 per bus | Which channel is SDA and which SCL |
| Modbus | 1 | Mode (RTU / ASCII / TCP), direction, serial line |
| What | Value |
|---|---|
| Preset wheels | 60-2 (default), 36-2, 36-1 |
| Total teeth (custom) | 1 to 360 |
| Missing teeth (custom) | 0 to 10 |
| Sync angle | −360° to +360° |
| Steps per tooth | 2 |
| CMP pulse width | 10 steps (5 teeth) |
| What | Requirement |
|---|---|
| Screen resolution | 1280×720 or more |
| Browser for drawing and exporting | Any modern one |
| Browser for connecting the ESP32 | Chrome, Edge, Opera or Firefox |
| Languages | Spanish and English |