> ## Documentation Index
> Fetch the complete documentation index at: https://docs.oryx.mechatronstudio.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Version history

> Go back to how a project was at an earlier save. Pro plan.

> [!NOTE]
>
> Version history is available with the **Pro** plan.

Every time you save a project **and the signal changed**, a version is
recorded. The **last 20** of each project are kept: past that, the oldest is
deleted automatically.

It is not the same as [undo](https://docs.oryx.mechatronstudio.com/en/editor/clipboard-and-history.md): undo lives in
the tab and is lost when you close it; versions stay in your account and are
visible from any device.

## Open it

* **Menu → Projects**, the clock on the project's row.
* `Alt+H` from the editor, for the open project.

## What each version shows

Versions go from newest to oldest; the first carries the **Latest** mark. Each
one shows:

| Detail | Example |
| - | - |
| **When** | The date and time of the save |
| **How it was saved** | *Saved* (by hand), *Autosaved*, or *Restored from …* |
| **What changed** | *+32 steps*, *−1 channels*, or *signal edited* if only the drawing changed |
| **Size** | The steps and channels it had |

> [!NOTE]
>
> Consecutive autosaves are merged: while the latest version is an unnamed
> autosave less than half an hour old, the next one replaces it instead of adding
> another. A save by hand **always** adds a version.

## What you can do

| Action | What it does |
| - | - |
| **Restore** | Opens that version in the editor. Your project **does not change** until you save; when you do, it is recorded as a new *Restored* version |
| **Open as a new project** | Opens that version as a separate project, leaving the original alone. It is named like the project, with the date in parentheses |
| **Name version** | Gives it a name so you can find it later (say, *"before changing the CAN"*) |
| **Delete version** | Deletes it. It cannot be recovered |
| **Clear history** | Deletes every earlier version. The project stays as is |

When you restore, the header says: *"Version from … restored · unsaved"*.

## Space

Versions **use space** in your [storage](https://docs.oryx.mechatronstudio.com/en/projects/storage-and-usage.md). To
save room, most are stored as the difference from the previous one, not as a
full copy. The history footer says how many there are and how much they take.

## If you are no longer on Pro

Existing versions are still **visible**, but they cannot be restored or opened
as a new project, and no new versions are recorded. They become available
again when you return to Pro.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.